LED Trailer Light w/ Reflex Reflector - Clearance, Turn Signal, or Side Marker - Rectangular - Red - OPT44NR
Our Price: $7.97
(1)
In Stock
4" LED trailer light can be a clearance, turn signal, or side marker light and has a built-in reflex reflector. It mounts on the surface of the trailer and wires into the trailer with the 3-wire pigtail.
- Clearance Lights
- Rectangle
- Red
- 4L x 2W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Turn
- Non-Submersible Lights
- Optronics
Valcrum Universal Threaded Aluminum Oil Bath or Grease Cap for Dexter 9K to 10K GD Axles - Black
Retail: $82.99
Our Price: $44.40
(10)
In Stock
Replace the oil/grease cap, O-ring, and plug on your Dexter 9K-10K GD axle or drum. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal particles. Easy access side port ...
Features: Replaces the oil bath/grease cap, O-ring, and plug on these axles or drum kit: Dexter 9K-10K GD axles manufactured after 7/2009 Dexter #13G drums manufactured after 7/2009 Direct
- Caps
- 3.5 Inch O.D.
- Oil Cap
- Threaded Grease Cap
- Valcrum
Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat Finish - Leaf Spring - 10,000-lb Dexter
Our Price: $1,359.12
(12)
In Stock
Machine-finished rotors and e-coated calipers and mounting brackets are included in this 2-wheel kit. Designed for use on Dexter 10,000-lb axles with oil bath hubs made after May 2013 (008-430-03 ...
psi rating of at least 1,500 Specs: Fits: Axle capacity: 9,000 lbs to 10,000 lbs #99 Spindle Spring axles only - does not fit torsion axles Axle type: Dexter general-duty axles manufactured after May
- Disc Brakes
- 16 Inch Wheel
- 10000 lbs Axle
- 8 on 6-1/2 Inch
- Standard Grade
- Rotor
- Kodiak
Dexter Fortress Bolt-On Aluminum Oil Cap for 9K to 12K Dexter Axles
Our Price: $62.63
(21)
In Stock
Replace the oil cap, gasket, and plug for your industrial-grade Dexter axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil ...
Features: Replaces the bolt-on oil cap, gasket, and plug for your Dexter axle Fits industrial-grade Dexter axles Red retainer ring shields clear viewing lens against damage Large side plug is easy to
- Caps
- Oil Cap
- Dexter
Emergency Break Away Cable Repair Kit for Dexter Axle A-60 Brake Actuators
Retail: $103.99
Our Price: $45.84
(25)
In Stock
Includes the components needed to repair the break away cable on your Dexter Axle A-60 brake actuator. Works with all Dexter Axle A-60 brake actuators.Features: Includes the components needed to repair the safety cable on your Dexter Axle A-60 brake actuator Works with all Dexter Axle A-60 brake actuators Comes with: 17" breakaway cable, cable
- Brake Actuator
- Cables
- Disc Brakes
- Hydraulic Drum Brakes
- Breakaway Parts
- Dexter
Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes
Retail: $228.19
Our Price: $157.95
(30)
In Stock
Replace the master cylinder in your Dexter disc brake actuator. Includes master cylinder, filler cap, orifice fitting, solenoid valve, and hardware. Fits most Dexter disc brake actuators in the A ...
Features: Replaces the master cylinder in your Dexter disc brake actuator Fits most Dexter disc brake actuators in the following Series: (A-60, A-75, A-84, A-160, A-200, XR-84 and XR-200) Durable
- Brake Actuator
- Disc Brakes
- Master Cylinder
- Dexter
Kodiak Disc Brakes - 13" Rotor - 8 on 6-1/2 - Raw Finish - Torsion - 10K Dexter and Lippert
Our Price: $1,314.56
(1)
Machine-finished rotors and e-coated calipers and mounting brackets are in this 2-wheel kit. For Dexter or Lippert 10K torsion axles with oil bath hubs made prior to July 2009 (8-288-3UC1). Fits ...
psi rating of at least 1,500 Specs: Fits: Axle capacity: 9,000 lbs to 10,000 lbs #99 Spindle Axle type: Lippert and Dexter torsion axles manufactured before July 2009 Hub type: Dexter K08-288-91
- Disc Brakes
- 17-1/2 Inch Wheel
- 10000 lbs Axle
- 8 on 6-1/2 Inch
- Standard Grade
- Rotor
- Kodiak
DeeMaxx 11" Rotor - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 10K Dexter
Retail: $227.85
Our Price: $190.06
In Stock
Retrofitting your 10K Dexter axles? This slip-over rotor is ideal for adding braking power to a Dexter idler disc brake hub (8-288-3UC1). Vented design helps to prevent heat-related damage. E-coat ...
Features: Fits over Dexter idler hub and is held in place by your existing wheel bolts Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade
- Trailer Brakes
- 10000 lbs
- Disc Brakes
- Rotors
- DeeMaxx
Kodiak Disc Brakes - 11" Rotor - 8 on 6-1/2 - Dacromet - Leaf Spring - 10K Dexter and Lippert
Our Price: $917.67
(4)
In Stock
Dacromet-coated rotors, calipers, and mounting brackets are included with this 2-wheel disc brake kit. Designed for use on Dexter or Lippert 10K axles with oil bath hubs made prior to July 2009 ...
and Dexter general-duty axles manufactured before July 2009 Hub type: Dexter K08-288-91 (8-288-3UC1) Wheel size: 16" dual wheels Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" Rotor
- Disc Brakes
- 16 Inch Wheel
- 10000 lbs Axle
- 8 on 6-1/2 Inch
- Marine Grade
- Rotor
- Kodiak
Replacement Master Cylinder Reservoir Plug for Dexter Axle Brake Actuators
Our Price: $7.65
(5)
In Stock
Replaces the master cylinder reservoir plug on your Dexter Axle actuator. Fits all Dexter Axle actuators.Features: Replaces the master cylinder reservoir plug on your Dexter Axle actuator Fits all Dexter Axle actuators Specs: Outside diameter: 1-1/4" Inside diameter: 3/4" Quantity: 1 Fits: All
- Brake Actuator
- Plug
- Disc Brakes
- Hydraulic Drum Brakes
- Master Cylinder
- Dexter
Replacement Master Cylinder Hex Bolt - Dexter Model 10 and 20 Actuators - 3/8" -16 x 3"
Our Price: $2.68
(1)
In Stock
Replaces a 3/8"-16 x 3" hex bolt on the master cylinder of your Dexter Model 10 or 20 brake actuator. Fits all Dexter Model 10 and 20 actuators.Features: Replaces a 3/8" hex bolt on the master cylinder of your Dexter Model 10 or 20 brake actuator Fits all Dexter Model 10 and 20 actuators Specs: Size: 3/8"-16 x 3" Quantity: 1
- Brake Actuator
- Bolts
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Master Cylinder
- Dexter
Replacement Hex Nut for Dexter Model 10 and 20 Actuators
Our Price: $5.27
In Stock
Replaces the hex nut for your Dexter Model 10 or 20 actuator. Fits all Dexter Model 10 and 20 actuators.Features: Replaces the hex nut for your Dexter Model 10 or 20 actuator Fits all Dexter Model 10 and 20 actuators Specs: Size: 3/8" - 16NC Quantity: 1 hex nut Features: Fits all Dexter Model 10
- Brake Actuator
- Nuts
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Dexter
Replacement Locknut for Dexter Model 20 Actuators - 5/8" NC
Our Price: $4.11
(2)
In Stock
Replaces the 5/8" NC locknut for your Dexter Model 20 actuator. Fits all Dexter Model 20 actuators.Features: Replaces the locknut for your Dexter Model 20 actuator Fits all Dexter Model 20 actuators Specs: Size: 5/8" NC Quantity: 1 locknut Fits: All Dexter Model 20 actuators
- Brake Actuator
- Nuts
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Dexter
Replacement Hex Bolt for Dexter Model 60 Actuators - 7/16" NF
Our Price: $6.61
Replaces a 7/16" NF hex bolt for your Dexter Model 60 brake actuator. Fits all Dexter Model 60 actuators.Features: Replaces a 7/16" NF hex bolt for your Dexter Model 60 brake actuator Fits all Dexter Model 60 actuators Specs: Size: 7/16 NF Quantity: 1 hex bolt Fits: All Dexter Model 60 actuators
- Brake Actuator
- Bolts
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Dexter
Replacement Hitch Pin Kit for Dexter Brake Actuators
Our Price: $24.08
Replaces the hitch pin for your Dexter brake actuator. Fits all Dexter A-84, XR-84, and A-160 brake actuators.Features: Replaces the hitch pin for your Dexter brake actuator Fits all Dexter A-84, XR-84, and A-160 brake actuators Fits: Dexter brake actuators: A-160: ST-UFP40075 and 099-162-34 A-84: K99-184-00
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Pins and Clips
- Dexter
Replacement Hex Locknut for Dexter Model 60 Actuators - 7/16" NF
Our Price: $3.49
In Stock
Replaces the 7/16" NF hex locknut for your Dexter Model 60 brake actuator. Fits all Dexter Model 60 actuators.Features: Replaces the 7/16" NF hex locknut for your Dexter Model 60 brake actuator Fits all Dexter Model 60 actuators Specs: Size: 7/16" NF Quantity: 1 hex locknut Fits: All Dexter Model
- Brake Actuator
- Nuts
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Dexter
Replacement Hex Bolt for Dexter Model 6 Actuators - 5/16 x 1/2 - Self Tapping
Our Price: $3.40
In Stock
Replaces a self-tapping hex bolt for your Dexter Model 6 brake actuator. Fits all Dexter Model 6 actuators.Features: Replaces a self-tapping hex bolt for your Dexter Model 6 brake actuator Fits all Dexter Model 6 actuators Specs: Size: 5/16" x 1/2" Quantity: 1 hex bolt Fits: All Dexter Model 6
- Brake Actuator
- Bolts
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Dexter
Replacement Hex Locknut for Dexter Model 60 Actuators - 1/2" NF
Our Price: $4.02
(1)
In Stock
Replaces the 1/2" NF hex locknut for your Dexter Model 60 brake actuator. Fits all Dexter Model 60 actuators.Features: Replaces the 1/2" NF hex locknut for your Dexter Model 60 brake actuator Fits all Dexter Model 60 actuators Specs: Size: 1/2" NF Quantity: 1 hex locknut Fits: All Dexter Model 60
- Brake Actuator
- Nuts
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Dexter
Replacement Bolt for Dexter Model 20 Brake Actuator - 4-1/4" x 5/8" NC - Grade 5
Our Price: $7.32
(1)
In Stock
Replaces a 4-1/4" x 5/8" NC - Grade 5 bolt for your Dexter Model 20 brake actuator. Fits all Dexter Model 20 brake actuators.Features: Replaces a 4-1/4" x 5/8" NC - Grade 5 bolt for your Dexter Model 20 brake actuator Fits all Dexter Model 20 brake actuators Specs: Size: 4-1/4" x 5/8" NC - Grade 5
- Brake Actuator
- Bolts
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Dexter
Replacement Nylon Washer for Dexter Model 6 and 10 Actuators
Our Price: $2.82
(13)
In Stock
Replaces the 3/8" nylon washer for your Dexter Model 6 or 10 actuator. Fits all Dexter Model 6 or 10 actuators.Features: Replaces the nylon washer for your Dexter Model 6 or 10 actuator Fits all Dexter Model 6 or 10 actuators Specs: Size: 3/8" Quantity: 1 nylon washer Fits: All Dexter Model 6 or 10
- Brake Actuator
- Washers
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Dexter
Kodiak Disc Brakes - 11" Rotor - 8 on 6-1/2 - Raw - Leaf Spring - 10K Dexter and Lippert
Our Price: $861.54
(14)
In Stock
Raw finish rotors and calipers and mounting brackets are in this 2-wheel kit. For Dexter or Lippert 10K axles with oil bath hubs made prior to 2009 (8-288-3UC1). Fits 16" and 16-1/2" dual ...
psi rating of at least 1,500 Specs: Fits: Axle capacity: 9,000 lbs to 10,000 lbs #99 Spindle Axle type: Lippert and Dexter general-duty axles manufactured before July 2009 Hub type: Dexter K08-288-91
- Disc Brakes
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 10000 lbs Axle
- 8 on 6-1/2 Inch
- Standard Grade
- Rotor
- Kodiak
Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat - Leaf Spring - 10K Dexter and Lippert
Our Price: $1,010.21
(7)
Machine-finished rotors and e-coated calipers and mounting brackets are included in this 2-wheel kit. Designed for use on Dexter or Lippert 10,000-lb axles with oil bath hubs made prior to 2009 ...
psi rating of at least 1,500 Specs: Fits: Axle capacity: 9,000 lbs to 10,000 lbs #99 Spindle Axle type: Lippert and Dexter general-duty axles manufactured before July 2009 Hub type: Dexter K08-288-91
- Disc Brakes
- 16 Inch Wheel
- 10000 lbs Axle
- 8 on 6-1/2 Inch
- Standard Grade
- Rotor
- Kodiak
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased - AKHD-545-35-EZ-K
Our Price: $98.09
(629)
In Stock
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race ...
Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy
- Hub with Integrated Drum
- L68149
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 5 on 4-1/2 Inch
- L44649
- EZ Lube
- Pre-Greased
- For 3500 lbs Axles
- etrailer
Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased - AKHD-865-7-2-EZ-K
Our Price: $112.75
(157)
In Stock
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and ...
Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy
- Hub with Integrated Drum
- 25580
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 8 on 6-1/2 Inch
- 14125A
- EZ Lube
- Pre-Greased
- For 7000 lbs Axles
- etrailer